Maselec MLA-3 Stereo Triband Compressor 2010s - Black is a used item in excellent condition, listed on Reverb. The asking price is £3,548. It is offered by JJ 's Gear Emporium through Reverb. It is in our Compressors & Dynamics category. 8 similar listings have a median asking price of £3,497. Used Gear Hunter first saw this listing on 29 October 2026 and last saw it on 9 November 2026. It has been seen 20 times in our scans. Prices are converted from the seller's currency when we scan the listing, so the amount you pay may differ slightly. The seller sets shipping, and import duty or VAT may apply, so check the final cost and the item's details on Reverb before buying.
From the seller
Gently used in a smoke free Mastering Facility.
With the Maselec MLA-3 Triband Compressor the input signal is split into three frequency-bands. Each band is passed through a stereo compressor where gain and compression can be altered.
The outputs of the compressors are then re-combined and fed to the outputs. There are four different frequencies for each of the two crossovers that can be separately selected for the low-to-mid and the mid-to-high bands.
The three frequency-band compressors have separate controls so that different parts of the audio spectrum can be adjusted and tuned. With separate gain controls for each frequency-band, the MLA-3 can be used as an equalizer.
You can always adjust the controls for the separate frequency bands to different settings. There is no technical reason why they should be the same for all frequencies. Overall Input and Output gain controls make it easy to set up for different operating levels.
Inputs
The inputs are electronically balanced, virtually ground floating, making them perform as if they are transformer coupled, but without the associated coloration, low frequency distortion and restricted bandwidth. The input impedance is 100kohm. Maximum input >+29dBu (balanced).
Outputs
The outputs are electronically balanced and can deliver >+28dBu into 600ohm (balanced). Output impedance is 33ohm (balanced and unbalanced). Both inputs and outputs can be unbalanced by simply grounding either pin 2 or pin 3.
