Back to Browse
TL Audio Fat Track Tube Production Suite
£875
Very GoodReverb12d ago
Sold by
N
Nate's Boutique
Details
- First Seen
- 29 October 2026
- Last Seen
- 29 October 2026
- Times Seen
- 1
About this listing
TL Audio Fat Track Tube Production Suite is a used item in very good condition, listed on Reverb. The asking price is £875. It is offered by Nate's Boutique through Reverb. It is in our Preamps & Channel Strips category. This listing is no longer listed on the shop; it may have sold or been withdrawn. Used Gear Hunter first saw this listing on 29 October 2026. It has been seen 1 time in our scans. Prices are converted from the seller's currency when we scan the listing, so the amount you pay may differ slightly. The seller sets shipping, and import duty or VAT may apply, so check the final cost and the item's details on Reverb before buying.
From the seller
Up for sale is my TL Audio Fat Track. TL Audio got it man, I mean … the gluing effect, warmness, musical EQ’s, tube weight…you name it. It adds a unique analog touch to sterile recordings.
Original Tubes/Valves + DO-8/Firewire card!!! (rare)
The last time I used it, it worked perfectly
SOLD AS IS
manual: drive.google.com/file/d/16H4_WxvS_thfGHOZcH0kbty6jEESuxNI/view?usp=drive_link
Technical specification:
2 Input Channels (figures quoted to Direct Outputs with Fader at maximum):
Line Input: Balanced, via 3 pin TRS jack.
Nominal Level +4dBu, Gain range +/-20dB.
Frequency Response 10Hz to 40KHz, +/-0.4dB.
Maximum Input Level +22dBu.
Noise -83dBu unweighted, 22Hz to 22KHz.
Mic Input: Balanced, via 3 pin XLR.
Gain range +16dB to +60dB (-14dB to +30dB with pad).
Input Noise (EIN) -127dBu, 22Hz to 22KHz @ 60dB gain,
Frequency Response 10Hz to 40KHz, +/-0.5dB, @ 40dB gain.
Maximum Input Level +6dBu (+36dBu with pad).
Switchable 48V Phantom Power.
Instrument Input: Unbalanced 0.25” jack.
Nominal input -16dBu, Gain range +/-20dB.
Maximum Input Level +8dBu.
Frequency Response 10Hz to 40KHz, +/-0.5dB.
Noise -83dBu unweighted, 22Hz to 22KHz.
Direct Output: Post EQ and Fader, Pre Mute Switch.
Balanced, via 3 pin TRS jack.
Nominal Level +4dBu.
Maximum Level +22dBu.
Mono Inputs: Phase Reverse Switch.
Switchable High Pass Filter, -3dB @ 90Hz, 2nd order.
Equaliser:
“High” +/-15dB @ 10KHz.
“Mid” +/-15dB, swept 150Hz to 7KHz, Q =0.7.
“Low” +/-15dB @ 80Hz.
Tube Stage: Pre EQ.
Drive LED: Variable intensity, from 0dBu to +12dBu, indicating increasing Tube drive. Distortion is predominately 2nd Harmonic, increasing with Drive LED from 0.5% to 3% (typical).
Peak LED: Illuminates at +19dBu.
Multiple point monitoring at Input stage and post EQ.
Insertion Point: Post EQ, Pre Fader.
Semi-balanced Send, balanced Return, on separate 3 pin TRS jacks.
Bypass switch.
Nominal Level -2.7dBu.
FX Send: Post EQ, Fader and Mute switch.
Variable send level.
Routing: To Main L+R stereo mix, via pan pot (-3dB at centre) and mute switch.
Four 2-Track Returns:
Fader: Rotary, 0dB maximum gain.
Inputs: Balanced, via 3 pin TRS jacks.
Nominal Level individually switchable +4dBu/-10dBu.
Maximum Input Level +22dBu.
Routing: To Main L+R stereo mix, via Fader and routing switch.
Main Outputs:
Fader: Rotary, +10dB maximum gain.
Tube Stage: Post Mix Amps.
XLR Outputs: Balanced, nominal level +4dBu.
Maximum level +26dBu.
Noise, all faders @ 0dB, -80dBu, 22Hz to 22KHz.
Noise, Main Fader @ minimum, -95dBu, 22Hz to 22KHz.
Jack Outputs: Unbalanced, nominal level -10dBu
Tape Output: Combined TRS jack, nominal level -10dBu.
Insertion Point: Pre Fader.
Semi-balanced Send, balanced Return, on separate 3 pin TRS jacks.
Bypass switch.
Nominal Level -2.7dBu.
FX Send:
Output: Mono, semi-balanced, via 3 pin TRS jack.
Nominal level -6dBu.
Noise -87dBu, channel sends @ maximum.
Noise -100dBu, channel sends @ minimum.
FX Returns:
Inputs: Stereo, Right Input normalled to Left Input for Mono compatibility.
Balanced, via 3 pin TRS jacks.
Nominal level +4dBu.
Maximum Input Level +22dBu.
Monitoring:
Source: Normally follows Main Output, overridden by 2-Track AFL selection.
Level controlled by large diameter knob.
Main / Alt LS switch.
LS Mute switch.
LS Outputs: Main and Alt LS, balanced on 3 pin TRS jacks.
Nominal Level +4dBu.
Maximum Level +26dBu.
Noise -80dBu, all faders @ 0dB.
Noise -100dBu, Monitor Fader @ minimum or LS muted.
Phones Outputs: 2 stereo outputs, with separate level controls.
Phones 1 follow Monitor selection, for Engineer/Producer.
Phones 2 follow Main Output at all times, for Artist.
3 pin TRS jacks.
Minimum Impedance 32 ohms.
Digital I/O: DO-8/Firewire card
Dimensions: 381mm W x 330mm D x 150mm H. (15” x 13” x 6” approx).
Power Requirements:
Voltage: 230V 50Hz or 115V 60Hz, internally wired.
Consumption: 37VA, without digital I/O.
41VA, with DO-8 option fitted.