Nagra SEVEN 2015 - Aluminum

2015-2018 Nagra Seven 2-channel recorder w/ the optional SMTPE/EBU Timecode board. Very little use on it and it has been sitting in its box for most of its life. RECORDING Internal storage:Micro SD Flash memory cardRemovable media:SD Flash memorycardDisk format:FAT 16 / 32Recording Method:Linear digital PCM, optional:MPEG 1 layer IIFile type:16 / 24 bit Broadcast Wave File BWF (WAV)A/D & D/A:24 Bit Sigma DeltaBit rates:32 kbits/s up to 384 kbits/secTracks:2 individualSampling Rate:44.1, 48, 88.2, 96, 176.4 and 192kHzRecording capacity:1hr at 24 bit 48 kHz per GB of memoryPre-recording buffer:ProgrammableDisplay:Color LCD touchscreenLevel meters:On colour display INPUTS Digital input:XLR 3-pole / AES 42Analogue inputs:2 x XLR Microphone (Dynamic, +48V Phantom) / lineMic. input sensitivity:2.8, 10 and 40 mV/Pa selectableMic. input noise:Uin < 1µV (2.8 and 10 mV) @ 220Ω Uin < 1.6µV (40 mV)Limiters:On microphone inputsLine input sensitivity:Adjustable from -6 dBm up to +24 dBm for 0 dBFS recordingTHD at 1 kHz:2.8mV Mic <0.2%, 10mV Mic <0.1%, line <0.1% (measured on AES out)Frequency response:Mic, 10Hz – 75 kHz (+0 – 3dB), Line 10 Hz – 90 kHz (+0 -1dB) (measured on AES out)Signal-to-noise ratio:>110 dB ASA “A”Input level adj. range:42 dB Mic and from -6 to +24 dB LineInput filters:LFAInternal microphone:On the front panelCrosstalk:Mic >70dB : Line > 110dB OUTPUTS Analogue line output:XLR 4.4V max (+15 dBm)Crosstalk:>110 dBSignal-to-noise ratio:>100 dBDigital output:XLR AES-3 (24 bit or 16 bit)THD+N:<0.004%Frequency response:10 Hz – 75 kHz (+0-3dB)Headphones:Stereo 6.3mm (¼”) Jack 50 ΩInternal speaker:0.3W OTHER USB:Micro AB connectorM/S Decoder:SwitchableEthernet:RJ 45 GENERAL Dimensions:165 x 175 x 65mm (W x D x H) (Incl. battery box)Weight:800g (1.75 lbs) (Incl. battery pack)Power supply:External 15VPower Consumption:Approximately 5WCharge time:Approximately 3 hoursBattery life:>5 hoursRelative humidity:From 10% to 99% (non condensing)