PMC IB1S-AIII active studio monitors

Matched pair with original stands. Selling my beloved PMC Speakers and their official PMC stands. These speakers are ACTIVE which means you don't need any external amps to connect them. A huge bonus. You just go straight into your sound card. A lot of PMC speakers are PASSIVE. These PMC's are used in a lot of mastering and mixing houses throughout the world and really do sound fantastic. If you're looking at PMC monitors you will already know they are the industry standard for mastering and monitoring. These speakers do a fab job if you like mixing quietly or loud. They have a beautiful range. I have the original boxes but in reality it would prob be easier when picking up to just carefully place them well blanketed in the back of some sort of van. I will leave them connected up so the buyer can hear them and examine them first before dismantling. Full specs below, new these are just shy of 12k without the stands! Grab yourself a bargain! Specs: The PMC IB1S-AIII is a three-way active studio monitor for recording and mixing studios, mastering and broadcast facilities, using many improvements found on the IB2S-A. The PMC IB1S-AIII features the same award-winning Advanced Transmission Line (ATL) technology, proprietary low-frequency carbon fibre and Nomex 10” flat piston driver isolated three-inch midrange driver and 27mm soft dome high-frequency driver as the original IB1S-A design. The activated design uses the popular PMC DS-001 Class D power amp which is housed at the back of the speaker and delivering an impressive 400W of power. Using some of the features of the IB2S-A the ATL cabinet is now lined with newly engineered absorptive foam to minimise harmonic distortion and deliver superior definition. This translates in much clearer bass and transparent midrange uncoloured by low frequencies. In addition, the updated cabinet features extra internal bracing, further reducing crosstalk and resonances. PMC IB1S-AIII Specs: IB1S-A Type: Activated Useable: freq response 25Hz-25kHz Peak: SPL @ 1M 116dB Sensitivity: 89dB 1W 1m Impedance: 4 Ohm nominal Effective line length: 2.4m 8ft Drive units LF 240mm, 100mm voice coil HF 27mm soft dome Crossover Frequency: 380Hz & 3.8kHz Input connectors: 3 Pairs 4mm Sockets (Tri-wire or Tri-Amp) Activated: DS-001 Distortion <0.0007% 20hz-20kHz full o/p Slew rate .60 micro seconds Power B width 1Hz to 100Hz Finish: Neo Black IB1S Dimensions H 740mm 29.1" W 330mm 13.0" D 465mm 18.3" IB1SM-C (centre channel) H 330mm 13.0" W 740mm 29.1" D 465mm 18.3" Weight (each): 46.5kg 102.3lbs