Barefoot Sound MicroStack45 3-Way Active Reference Monitors & Stereo Subwoofers - Pair - Mint, Open Box

Experience Full Range Power And Precision With The Barefoot Sound MicroStack45 3-Way Active Reference Monitors and Stereo Subwoofers With the recent introduction of Barefoot Sound's MicroSub45 Dual-Force technology subwoofer, you can create MicroStack45, a stereo package of two MicroMain45 3-way active reference monitors and two MicroSub45 subwoofers. Each stereo system incorporates a pair of 1-inch tweeters, four 2.5-inch midrange drivers, and six high-excursion 8-inch woofers, all designed to work seamlessly together and as a single unit. Dual-Force Low-Frequency Extension MicroSub45 subwoofers feature Barefoot's innovative Dual-Force technology, housing a pair of opposing 8-inch aluminum cone drivers plus a balanced analog high-pass filter that crosses the system over at 80 Hz. Dual-Force technology eliminates vibration within the MicroSub45 speaker cabinet, delivering clean low-frequency extension down to 25 Hz when combined with the MicroMain45. Stacks and Tilts Barefoot Sound's MicroStack45 system works optimally when the MicroMain45 monitors are positioned either directly on top of or underneath the MicroSub45 subwoofers, depending on your preference. A tilt feature enables the MicroMain45 monitors to be directed at the listening sweet spot and is designed so that the stack is very sturdy and will not slip. If you are working to a budget, you can start with a stereo pair of MicroMain45 monitors then add two MicroSub45 subwoofers when the time is right. MEME Technology Barefoot Sound's Multi-Emphasis Monitor Emulation technology harnesses sophisticated DSP modeling to bring you the voicing characteristics and responses of classic studio nearfield monitors. You can use the four-position wired remote to quickly switch through different voices, allowing you to preview your mix on different types of speakers, from the same stereo position and without the clutter of multiple speaker systems. The four settings are "Old School," "Cube," "Hi-Fi," and "Flat." The "Old School" setting captures the essence of the ubiquitous NS10M, rolling off the sub-bass and top-end information, and bringing forward mid-range presence. The "Cube" setting is a nod to the "aura" of the classic full-range micro monitors of yesteryear, a valuable setting in the age of laptops, tablets, and earbuds. "Hi-Fi" sweetens the high end and warms mid-range to behave much like consumer hi-fi systems, the perfect setting for quick artist playback or when listening to favorites in the studio. Last, as you might expect, "Flat" is the prized default setting, offering the true, revealing Barefoot Sound. 2220 Watts of Power 80 Hz Balanced Analog High-Pass Filter Bass Response Down to 25 Hz Dual-Force Technology (6) 8" Aluminum Woofers Dual-Force Technology MEME Technology SPECIFICATIONS Controls Input level stepped attenuator Equalization contour Input Impedance 50k Ohm Frequency Response (MicroMain45) 18Hz - 50kHz (+/-3dB) 26Hz - 40kHz (+/-1dB) Bass Response -3 dB @ 25Hz, Q = 0.707 Slope = 12 dB/octave Cabinets 32 liters total internal volume together Both units are sealed woofer and midrange enclosures Machined aluminum baffle plate Long fiber foam acoustic damping throughout Crossover Frequencies 80 / 600 / 3600 Hz Tweeter 1" ring radiator Advanced geometry motor Rear waveguide chamber Amplifier: 180W Hypex Midranges 2 x 2.5" aluminum cones Advanced geometry motor +/- 2 mm linear excursion Amplifier: 180W Hypex Woofers 2 x 8" aluminum cones Advanced geometry motor +/- 13 mm linear excursion Amplifier: 500W Subwoofers 4 x 8" aluminum cones Advanced geometry motor +/- 25 mm linear excursion Amplifier: 1000W AC Power Input Nominal 115 VAC or 230 VAC selectable Power Consumption: Idle 25W, Maximum: 1165W MicroMain45 Dimensions and Weight Cabinet: 11.0 x 15.5 x 10.75 inches (279 x 394 x 273 mm) Overall: 11.0 x 15.5 x 11.0 inches (279 x 394 x 279 mm) Speaker: 37.5 lbs each (17 kg) Shipping: 47 lbs each (21 kg) MicroSub45 Dimensions and Weight Cabinet: 14.0 x 9.5 x 13.0 inches (356 x 241 x 330 mm) Overall: 14.0 x 10.25 x 13.6 inches (356 x 260 x 345 mm) Speaker: 45 lbs each (20.5 kg) Shipping: 54.5 lbs each (25 kg) Stack Dimensions 14.0 x 20.50 x 13.6 inches Manufacturer: Barefoot Sound Model: MICROSTACK45 SKU: I607429-GA9992511-4-WHXX UPC: 850054580108 We are Chuck Levin's Washington Music Center Since 1958, Chuck Levin’s Washington Music Center has been the trusted destination for musicians and audio professionals across Maryland, Virginia, and Washington, D.C. Family-owned and operated, our legendary music store delivers Everything in Music®—from instruments and recording gear to pro audio, rentals, and repair services. Our team of musicians and industry experts lives and breathes gear, helping you build the perfect setup for your next performance, studio session, or installation. As an authorized dealer for top brands, we also offer our award-winning CHUCKSCLUSIVE…