Mint ART MX622BT Rack 6-Channel Stereo Mixer with Bluetooth, EQ, and Effects

The ART MX622BT Six Channel Stereo Mixer with BLUETOOTH and Effects Loop is a versatile single high rack mixer combining three balanced microphone or line level inputs with three stereo line inputs plus a stereo Bluetooth input into a single stereo line level mix. Each mono-balanced XLR input is designed with fully variable Input gain, Mic/Line switch, Clip indicator, and selectable 15 Volt Phantom power. There are three stereo line level inputs via the RCA-type jacks with separate Level controls for each stereo pair. The front panel also has a 1/8-inch input for portable audio device input. The Bluetooth input supports Bluetooth 5.0 and has its own level control and Pairing/ ON/OFF switch. The external effects loop section provides a mono Send from the three Mic/Line channels to external equipment and stereo Returns with Effects Level and In/Out switch. Stereo Record output RCA jacks provide a full-level signal of the entire mix at all times. The main outputs are stereo-balanced 1/4-inch TRS with Master Level and full range Bass/Treble equalization. The built-in power supply and single high 19-inch rack mount format allow for easy installation and reliable operation. ART MX622BT Features: Bluetooth 5.0 receiver Three balanced XLR inputs with separate Mic/Line switch, Level control and Clip Indicator Three pairs of RCA stereo inputs with separate Level controls Selectable 15 Volt Phantom power for each Mic channel Balanced ¼-inch TRS Main outputs with Master Level control Versatile Bass and Treble equalization on Main outputs Front TRS stereo 1/8-inch Input jack Stereo Record Out RCA jacks Effects Loop with Effects Level control and In/Out switch ¼-inch Effects Send with stereo Returns Internal power supply Solid metal case ART MX622BT Specifications: Input Connections: XLR-F balanced (3), ¼-inch unbalanced (2), RCA (6), 1/8-inch balanced (1) IOutput Connections: 1/4-inch TRS balanced (2), ¼-inch unbalanced (1), RCA (2) nput Impedance: 600/22K Ohms Mic/Line XLR inputs, 10K Ohms RCA inputs, 22K Ohms, 1/4-inch EFX Returns Output Impedance: 50 Ohms 1/4-inch Main outputs, 1K Ohms RCA Record outputs, 100 Ohms EFX output Maximum Input Level: -10dBu/+20dBu Mic/Line XLR inputs, +20dBu RCA line inputs, +20dBu EFX inputs Maximum Output Level: +24dBu balanced Main outputs, +20dBu RCA Record outputs, +20dBu EFX output Phantom Power: +15 Volts DC, regulated low noise Dimensions (HxWxD): 1.6 x 5 x 5.5-inch Phantom Power: +15 Volts DC, regulated low noise Maximum Gain: 56dB/26dB Mic/Line, 26dB RCA inputs Signal to Noise Ratio: >90dB typical THD: Equalizer Range: +/-12dB @ 100Hz & 10KHz Bluetooth: v5.0, up to 30M range, Class 2 device Power Requirements USA: 105 to 125 VAC / 50-60Hz, 15 Watts typical. Export units configured for country of destination Dimensions (HWD): 1.75 x 19 x 6 inch Weight: 6.2 lbs.