Pioneer CT-F1250 - Fully refurbished, new belts, pinch roller, above factory specifications. High serial number. is a used item in excellent condition, listed on Reverb. The asking price is £2,886. It is offered by Petronel 's Gear Locker through Reverb. Used Gear Hunter first saw this listing on 28 September 2026 and last saw it on 9 November 2026. It has been seen 32 times in our scans. Prices are converted from the seller's currency when we scan the listing, so the amount you pay may differ slightly. The seller sets shipping, and import duty or VAT may apply, so check the final cost and the item's details on Reverb before buying.

From the seller

PIONEER CT-F1250 Fully refurbished, new belts, pinch roller, above factory specifications. High serial number. Stereo Cassette Deck with 3-Head / 2-Motor Quartz Direct Drive, Memory Stop / Repeat & Pioneer-Exclusive WqLB Tuning System Engineered for Excellence - 3 Head Monitor-Capable with Memory Stop/Repeat - Uni-X’Tal Ferrite Metal-Capable Heads & “Small-Window” Erase - Quartz/Direct Drive 2-Moror DC for Low 0.03% Wow/Flutter - Closed-Loop Dual Capstan with Automatic Tape-Slack Canceller - Pioneer-Exclusive WqLP Tuning System with LEDs - 25-Segment Fluroscan 3-Mode Meter, 4-Digit Electronic Counter, Wide-Range Amplifiers & More CT-F1250 Specifiations Type: Compact cassette tape deck, 2-channel stereo/mono Motors: Quartz-PLL direct drive motor for capstan drive, DC high torque for fast forward and rewind Heads: “Uni-Crystal Ferrite” recording/playback head (combination type). “Small-Window” erasing head x 1 Fast Winding Time: Within 86 seconds (C-60 tape) Wow and Flutter: No more than 0.03% (WRMS) Frequency Response: Standard, LH tapes: 20 to 18,000Hz Ferrichrome tape: 20 to 20,000Hz Chrome tape: 20 TO 20,000Hz Metal tape: 20 TO 20,000Hz Signal-to-Noise Ratio: Dolby OFF: more than 59dB. Dolby ON: more than 69dB (over 5kHz, standard, LH tapes). When a chromium dioxide tape is used, S/N is further improved by 4.5dB over 5kHz Harmonic distortion: No more than 1.0% (0dB) Inputs (Sensitivity/Maximum allowable input/impedance): MIC x 2” 0.3mV/100mV/30 kOhms, 6mm jacks (Reference MIC impedance, 250 Ohms to 10 kOhms). LINE x 2: 63mV/25V/50 kOhms, pin jacks Outputs (Refrence level/Maximum level/Load impedance): Line x 2: 450mV/640mV/50 kOhms, pin jacks. HEADPHONES x 1: 63mV/90mV/8 Ohms, 6mm stereo jack with output level controls Semiconductors: ICs – 22. Transistors – 139. Dioded – 125 including 9 zener diodes and 18 LEDs Other Features: 1) Dolby system (ON/OFF) with LED indicator 2) Tape selector (METAL/Chrome Dioxide/Fe-Cr/STD with METAL, CrO2 and Fe-Cr LED indicators 3) Tape calibration (Bias, Level and EQ) with LED indicators 4) Memory stop and play 5) Automatic repeat (Counter and End repeat) 6) Timer aid recording/playback device 7) Fluorescent display level meter with Peak/Peak Hold/Average Switch (-30dB to +8dB) 8) Electronic digital tape counter 9) Automatic tape slack canceller 10) Pitch control 11) REC mute device 12) Input Mixing (LINE + MIC) 13) DIM/BRIGHT switches for Meter and Counter display 14) Cassette Compartment illumination 15) Output level control (clicked for reference level; Left/Right coupled) Power requirements: 120/220/240V (switchable), 50-60 Hz Power consumption: 59 watts Dimensions: 16-9/16(W) x 7-3/8(H) x 14-9/16(D) inches. 420(W) x 187(H) x 369.5(D) mm Weight: 24 lb. / 10.9kg

Pioneer CT-F1250 - Fully refurbished, new belts, pinch roller, above factory specifications. High serial number.

Sold by

Details

About this listing

From the seller